level 4 polyethylene armor plates

  • Gray Gorilla Tactical Level IV Polyethylene 10x12 Plate ...

    VPAM armor standard (Europe) The VPAM scale as of 2009 runs from 1 to 14, with 1-5 being soft armor, and 6-14 being hard armor. Tested armor must withstand three hits, spaced 120mm (4.72") apart, of the designated test threat with no more than 25mm of back-face deformation in order to pass.

  • Ceramic Body Armor

    Chase Tactical 4SAS7 Level IV Rifle Armor Plate NIJ 04/05 Certified-DEA Compliant – MULTI CURVE - 10x12 Shooters Cut Chase Tactical. Special Price $186.96 Regular Price $219.95. ... Polyethylene Level III+ Plate By Vism NcSTAR. $164.99. Add to Cart. Out of Stock. BAP Backpack Armor Protection Level III Small Plate 8" x 13" PS Products.

  • Lightweight Body Armor Solutions

    Aug 19, 2019· Best Ceramic Level IV Body Armor. 8. AR500 Level IV Ceramic. If you're looking for a little bit more serious protection and don't mind the bulk, AR500's Level IV Ceramic/PE armor might be what you're looking for. Like the AR500 steel plates, you can find their ceramic plates in a …

  • AR500 Armor® Level III Lightweight Polyethylene Body Armor ...

    Light & Buoyant Armor. Our plates are made from Dyneema® ballistic material, which is the world's strongest fiber™. That, combined with a polycarbonate backing in a proprietary press and manufacturing process, has created some of the lightest armor on the market available to most budgets.

  • The best bulletproof body armor when SHTF – The Prepared

    An Ultra-light plate to stop Level III threats. high molecular weight Polyethylene is ~.9" thick (~23 mm.), and more expensive, but INCREDIBLY LIGHT.. The main tradeoff is you don't get a protection rating for Level IV Armor-Piercing (AP) threats such as .3006 or 7.62 by 51mm AP, or the semi-AP 5.56mm SS-109 / M-855 (the M-16 round).

  • PREVAIL LEVEL IV Level 4 Hard Armor Plate

    Weighing between 4 to 8 pounds for a 10×12, ceramic plates may be lighter than steel, but heavier than Polyethylene. Still, given the same level of protection (for example, Level III), a ceramic plate will likely be thinner and less costly than a polyethylene plate. Here, Sensible Prepper Presents: Shooting Body Armor Level lll Plates. Testing ...

  • DKX Body Armor Plates & Panels

    **Price Per Plate** In conjunction with an Level iiia or iiia+ vest our hard rifle plates protect the wearer against rifle threats up to 30-06 armor penetrating rounds! 10×12 Rifle Plates are for Safe Life Defense vest sizes XS and larger. 8″X10″ Plates for Safe Life Defense vest sizes 2XS and smaller.

  • Armor Plates for Bullet Proof & Tactical Vests up to 31% Off

    Along with a raised, embedded, and 3D Spartan Armor Systems Logo the "Elaphros" (Ultra Light Weight) Level III, Multi-curve, UHMWPE Plates sets the standard for those looking for a high performance, Level III Body Armor at an affordable price. These Plates come with a 5 year warranty and a 5 year shelf life! Specifications. Stand -Alone ...

  • Battle Steel Level IV 10x12 Ballistic Plates Only 5.5 lbs ...

    Level IV Rifle Plate, NIJ Armor Rating: NIJ 0101.05 Level 4 Ballistics, Size: 10" x 12" Item # 53YD44 Mfr. Model # GHx12SH

  • Armor Levels: Which Armor Stops Which Rounds | Propper

    Gray Gorilla Tactical Level IV PE Polyethylene / Ceramic (UHMWPE) plate body armor. Gray Gorilla Tactical Level lV Polyethylene Body Armor 10×12 Plate-PE-10124. Gray Gorilla Tactical Level lV Polyethylene Body Armor 6×6 Plate. Made in USA by American craftsmen. You can put away that inferior heavy steel body armor that they wore in the ...

  • AR500 Armor® Level III Lightweight UHMWPE Body Armor 10 x 12

    Nov 21, 2017· For when ounces are pounds and mobility is everything AR500 Armor® Level III Polyethylene Body Armor weighs in at a mere 3.3lb's per plate in our 10" x 12" standard shooters cut.

  • Level IV Body Armor | Smith Defense

    Level IV body armor plates are hard armor plates that are only made from composite, and are the highest rated protection under NIJ standard 0101.06. Ceramic level 4 plates are usually made from a combination of polyethylene and aluminum oxide backed with a tough synthetic fiber.

  • Comparing Hard Armor Materials: Steel, Ceramic, and ...

    The LA Police Gear Level IV Ballistic Armor Plate weighs in at 6.5 pounds and measures 9.85" x 11.8", which fits perfectly in our Atlas Plate Carrier. Featuring a slim 7/8" profile and ergonomic curvature, this plate is not only high performing, but also comfortable. The waterproof polyester/nylon cover enhances durability, ensuring your plate ...

  • Polyethylene Body Armor Plates | Polyethylene Armor Plates

    Polyethylene body armor plates are usually about 40% stronger than standard Aramid yarns, have a strength to weight ratio 8-15 times greater than steel, and are highly resistant to abrasion and cracking. Tactical Scorpion Gear's polyethylene armor plates are also extremely resistant to chemical damage.

  • Level 4 Body Armor Plates for Sale | Level 4 Ballistic Plates

    Tactical Scorpion Gear Level IV PE Polyethylene / Ceramic (UHMWPE) plate body armor.Tactical Scorpion Gear Level lV Polyethylene Body Armor 11x14 Plate-PE-11144Tactical Scorpion Gear Level lV Polyethylene Body Armor 6x6 PlateMade in USA by our own craftsmenYou can put away that inferior heavy steel body armor that they wore in the medieval daysFeatures A stand-alone armor plate with …

  • Best Body Armor [2020 Tested]: Hard Plates & Soft Armor ...

    Polyethylene (UHMWPE) Plates. PE or Polyethylene is essentially thermoplastic. Polyethylene armor is made by bonding unidirectional Ultra High Molecular Weight Polyethylene Fibers over the High Density Polyethylene sheet. Such sheets are place in mold, cut to shape, and compressed under high pressure and heat, which results to a cohesive hard ...

  • LEVEL IV ICW UP

    Chase Tactical 4SAS7 Level IV Rifle Armor Plate NIJ 04/05 Certified-DEA Compliant – MULTI CURVE - 10x12 Shooters Cut Chase Tactical. Special Price $186.96 Regular Price $219.95. ... Polyethylene Level III+ Plate By Vism NcSTAR. $164.99. Add to Cart. Out of Stock. BAP Backpack Armor Protection Level III Small Plate 8" x 13" PS Products.

  • VISM By NcSTAR Level 3+ Body Armor Plate, Shooters Cut ...

    Jul 05, 2018· Rating: NIJ III (standalone), plus 7.62x39mm PS ball / MSC Material: Polyethylene, with polyurea coating Size: 10×12 inches Contour: Triple curve Weight: 2.4 pounds Thickness: 1.1 inches MSRP: $699 URL: Notes: The lightest level III plates in this guide, Midwest Armor's FM3s really need to be worn and compared against other plates to truly appreciate the …

  • AR500 Armor 10" x 12" Polyethylene Level IV Body Armor ...

    Military Grade. American Made™ | We Develop & Manufacture Advanced Lightweight Body Armor. Level III+ Rifle Plates at 2.5 lbs (M) NIJ 0101.06 Certified.

  • RTS Tactical Ceramic NIJ 0101.06 level IV Rifle Protection ...

    A pair of 10" by 12" Level 3 Polyethylene Rifle Plates typically weigh around 6.5 lbs and they are capable of stopping 6 rounds of .308, which makes this an exceptional body armor defense!! The most significant burden of rifle plate body armor is the weight with which it comes.